Company
About Tulsi Traders
We manufacture and supply plywood, veneers and panel products for interior and architectural work — organised around the conditions a panel has to survive rather than around finishes alone.
What we do
Tulsi Traders is a manufacturer and supplier of plywood and veneers, working with architects, interior designers, contractors and homeowners across the residential, commercial and institutional segments.
Our range covers plywood across the grade spectrum — from moisture resistant and boiling water resistant panels for dry interiors through to IS 710 marine grade for permanently damp locations — alongside block boards, flush doors, decorative veneers, HDHMR boards, MDF, laminates and interior panels.
Every panel we supply is marked with its standard, licence number, grade, thickness and batch details. That marking is what makes a specification verifiable rather than a claim, and we would rather you check it than take our word for it.
In brief
20+
Years in the trade
14
Products in the current catalogue
6
Product categories
30 yr
Longest warranty in the range
How we specify
Most specification errors we see are not people buying too little — they are people buying too much. A bedroom wardrobe does not need a marine grade panel, and paying for one is money that could have gone into better hardware or a better finish.
So we work backwards from the condition. Where is the panel going? What will hit it? Who will clean it, and how often? Answer those and the grade usually selects itself. If a cheaper panel will do the job properly, we will tell you that.
The corollary is that we will also tell you where not to economise. The base carcass of a kitchen unit, anything within reach of a tap, and any panel against an external wall are the places where a lower grade costs more in the end.
What we supply
Plywood
MR, BWR and BWP grades marked to IS 303 and IS 710, with Gurjan face veneer options across the range.
Block Boards
Softwood batten core boards to IS 1659 in MR and BWP core grades — the better panel over a long span.
Flush Doors
Door leaves in solid and hollow core constructions, in sizes matched to standard frame openings.
Decorative Veneers
Natural veneers for surfaces where real timber grain is the finish, matched across a run on request.
HDHMR Boards
High density, high moisture resistant board for painted, routed and membrane-pressed joinery.
MDF
Medium density fibreboard for painted joinery, mouldings and routed panel work.
Laminates
Decorative laminates in a range of finishes and thicknesses for cabinetry and worktops.
Interior Panels
Wall panelling, louvres and decorative panel products for interior and architectural applications.
How we work
Marked and traceable
IS standard, licence number, grade, thickness and batch are stamped on the sheet, so what you were supplied is always verifiable.
Consistent between batches
Sourcing from ISO 9001:2015 certified processes so a repeat order behaves like the first one — which is what makes a phased project possible.
Honest specification
We recommend the grade the location needs. Over-specification is the most common way to waste money on a fit-out and we will say so.
Quotes against your list
Send a cutting list or a drawing and we will quote against it, including the thicknesses and sheet sizes that reduce waste.
Common questions
Yes. We supply architects, contractors and trade customers as well as homeowners working on their own projects. Enquiries are handled the same way regardless of order size.
Tell us about your project
Send a drawing, a cutting list, or just a description of the space. We will come back with a specification and a price.